IoT / SmartHome Smart Door, ML-SD100
|Open With :
Support Fingerprint, Pin Code, Core key.
|Wrong Pin Code Locked :
Entering the wrong Pin Code 5 times in 1 min, the system will automatically lock for 3 mins to prevent random Pin Code.
|Fingerprint Algorithm :
Adopting international leading fingerprint algorithm to eliminate false fingerprints and residual fingerprints.
|360 Degrees Automatic Recognition :
Pressing the correctly registered fingerprint at any angle on the module, the lock can effectively identify.
During fingerprint identification process, the lock will automatically update the fingerprint database.
|Wakeup mode :
Wakeup by fingerprint sensor or keyboard.
|Backlight flicker :
Enter the corresponding number and flash the relative backlight LED.
|Voice Guide :
Provide clear voice prompts for user operations.
|Fake PIN code Mode :
You can add any numbers (up to Max 32 keys) before and after the effective PIN code when you are concerned about your PIN Code being accidentally exposed.
|Vacation Mode :
Set the Vacation mode to keep the door closed and the normal user accounts are unable to unlock.
|Low-power Consumption Design :
The use of imported low-power energy-saving master control and major electronic components, high consumption and durability, strong anti-interference.
|Low Voltage Alarm :
When the operation is successful, the voice prompts the voltage to be low and accompanies the status light prompt.
|Emergency Power Supply :
If the battery is not replaced in time, plug in 5V micro USB power supply at the top interface can be used to open the lock.
|Antistatic Strong :
Contact discharge ±8kv, air discharge ±15kv.
|TECHNICAL SPECIFICATION||Model :
|Basic function :
Fingerprints, PIN Code, Mechanical Keys
|Type of fingerprint sensor :
|Fingerprint capacity :
|False recognition rate :
|Rejection rate :
|Contrast speed :
|Code button :
12 keys, Capacitive Touch button, LED Backlight
|Code capacity :
32 Sets of PIN codes
|Key press resistance :
3pcs AAA Alkaline battery (Please use authentic alkaline batteries)
|Urgent power supply :
5V Micro USB port
|Low pressure alarm :
|working currency :
|quiescent currency :
|Working temperature :
|INSTALLATION||1) Door material: Security door, gate, wooden door, glass door.|
|2) Door thickness: 60mm (The door thickness less than 60mm can also be installed, but some parts of the lock core will be exposed, not beautiful, if it exceeds 60mm, it can not be installed).|
|1. Install 3ea-AAA alkaline batteries with the correct positive and negative electrodes (Figure①).|
|2. Insert the smart cylinder from outside and adjust the position properly (Figure②).||3. Install the screw through the fixed core screw hole on the side of the cylinder (Figure ③).|
|4. Install the rear handle from inside, adjusting the position and tighten the screw (Figure④,⑤).|